Fmi ICST-01 Manual de usuario descargar pdf (Pagina 6)

IN-ICST-01-07 6

Number 9 is the Dip Switch 6 (I/O6), the Blue wire.

Number 10 is the Dip Switch 7 (I/O7), the White wire.

4.1 P/N ICST-01/ OEM

J1 I/O Connector

PIN # FUNCTION

Pin 1 Ground the Lt Blue wire.

Pin 2 Ground the Lt Blue wire.

Pin 3 + 24 V (From input power supply) NC

Pin 4 + 24 V (From input power supply) NC

Pin 5 +5 V (Do not recommend using this, loads the voltage regulator) NC

Pin 6 +5 V (Do not recommend using this, loads the voltage regulator) NC

Pin 7 Input 1 (Used as start signal) Yellow wire.

Pin 8 I/O 1 = Program PIN1 the Black wire.

Pin 9 I/O 2 = Program PIN2 the Purple wire.

Pin 10 I/O 3 = Program PIN3 the Orange wire.

Pin 11 I/O 4 = Program PIN4 the Red wire.

Pin 12 I/O 5 = Program PIN5 the Gray wire.

Pin 13 I/O 6 = Program PIN6 the Blue wire.

Pin 14 I/O 7 = Program PIN7 the White wire.

J2 Sensor Connector (STD. Optical Sensor) P/N 110569

PIN # FUNCTION

Pin 1 +5 V cc the White wire.

Pin 2 Signal from sensor to board the Blue wire.

Pin 3 Ground the Green wire.

Pin 4 +5 V ir the Red wire.

Pin 5 Ground the Black wire.

J3 Motor Connector

PIN # FUNCTION

Pin 1 A Phase the Red wire. Note: See section 3 system

Pin 2 A bar Phase the Yellow wire. installation for motor wiring.

Pin 3 B Phase the Green wire.

Pin 4 B bar Phase the Blue wire.

J4 Programming Connector

For use with the programming cable only. See pages 12 and 13 for details.

J5 Relay output Connector

PIN # FUNCTION

Pin 1 + 24 Vdc the Red wire.

Pin 2 Control to ground for RELAY1 the Brown wire.

Pin 3 + 24 Vdc the Red wire.

Pin 4 Control to ground for RELAY2 the Orange wire.

Pin 5 Not used + 24 Vdc NC

Pin 6 Not implemented NC

Pin 7 Not used + 24 Vdc NC

Pin 8 Not implemented NC

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios

Fmi ICST-01 Manual de usuario Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Fmi ICST-01